TA Triumph-Adler DCC 2526 - Manual (Page 190)

Section 7 COPIER MANAGEMENT
7-54
3
Press the “+” key or the “-” key to change the displayed time
to that desired (any available setting between 1 minute and
240 minutes).
Inch specifications
Metric specifications
NOTES
• The setting can be made to any 1-minute increment
between 1 minute, 5 minutes, 15 minutes, 30 minutes,
45 minutes, 60 minutes, 90 minutes, 120 minutes,
180 minutes or 240 minutes.
• If you want to quit the displayed setting without
changing it, press the “Back” key. The touch panel will
return to the screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
Copy eject location
Sets the location for the ejection of finished copies.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-45.)
Inch specifications
Metric specifications
2
Select “Select Copy output mode” under the “Default menu”
column on the left side of the touch panel and then press
the “Change #” key.
The “Select Copy output mode” screen will be displayed.
Inch specifications
Metric specifications
Close Back Low power mode chng. time
Possible to set the time for switching to low power mode
automatically after copy is done or last operation
Default setting - Machine default
( 1~240)
15 Minute
Close Back Low power mode chng. time
Possible to set the time for switching to low power mode
automatically after copy is done or last operation
Default setting - Machine default
( 1~240)
15 Minute
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Machine default
Select Copy output mode
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
30 Minute
30 Minute
Top tray
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Machine default
Select COPY output mode
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
30 Minute
30 Minute
Top tray