TA Triumph-Adler DCC 2526 - Manual (Page 191)

Section 7 COPIER MANAGEMENT
7-55
3
Press the key that corresponds to the desired location.
Inch specifications
Metric specifications
NOTES
• If you want to quit the displayed setting without
changing it, press the “Back” key. The touch panel will
return to the screen in step 2.
• When an optional Document Finisher is installed,
Select “Top Tray” and “Finisher.” When the Multi Job
Tray is installed, you can select from among “Top Tray,”
“Tray A,” and “Tray 1” through “Tray 5.”
• “Top tray” and “Left tray” options are available when
the optional Left Tray is installed.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
Fax eject location
Sets the location for ejection of received faxes and for printed
reports.
NOTE
This setting is displayed only when the optional
Document Finisher or Left Tray is installed.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-45.)
Inch specifications
Metric specifications
2
Select “Select FAX output mode” under the “Default menu”
column on the left side of the touch panel and then press
the “Change #” key.
The “Select FAX output mode” screen will be displayed.
Inch specifications
Metric specifications
Close Back
Default setting - Machine default
Set the default copy output destination.
Top tray
Tray1
Tray2
TrayA
Tray3
Tray5
Tray4
Select Copy output mode
Close Back
Default setting - Machine default
Set the default copy output destination.
Select COPY output mode
Top tray
Tray1
Tray2
TrayA
Tray3
Tray5
Tray4 End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Machine default
Select FAX output mode
Select the main mode
Key sound ON/OFF
Date / Time
Time difference
Top tray
Copy mode
On
GMT+09:00
03/09/03 14:00
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Machine default
Select FAX output mode
Select main mode
Key sound ON/OFF
Date / Time
Time difference
Top tray
COPY mode
On
GMT+09:00
03/09/03 14:00