TA Triumph-Adler DCC 2526 - Manual (Page 189)

Section 7 COPIER MANAGEMENT
7-53
3
Press the “+” key or the “-” key to change the displayed time
to the desired setting (between 1 minutes and
240 minutes).
Inch specifications
Metric specifications
NOTES
• It is recommended that you try to set a longer time
interval before auto sleep engages if you use the copier
frequently, and to a shorter time if there are long
intervals between use.
• If you want to quit the displayed setting without
changing it, press the “Back” key. The touch panel will
return to the screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
Auto low power time
Perform the following procedure to set the amount of time between
the point that copying ends and the energy-saving Low power mode
engages.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-45.)
Inch specifications
Metric specifications
2
Select “Low power mode chng. time” under the “Default
menu” column on the left side of the touch panel and then
press the “Change #” key.
The “Low power mode chng. time” screen will be displayed.
Inch specifications
Metric specifications
Close Back Sleep mode changing time
Possible to set the time for switching to sleep mode
automatically after copy is done or last operation
Default setting - Machine default
( 1~240)
60 Minute
Close Back Sleep mode changing time
Possible to set the time for switching to sleep mode
automatically after copy is done or last operation
Default setting - Machine default
( 1~240)
60 Minute
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Machine default
Select Copy output mode
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
30 Minute
30 Minute
Top tray
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Machine default
Select COPY output mode
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
30 Minute
30 Minute
Top tray