Selecting the copy eject location, Ready to copy. (full-color), Ready to copy. (full col.) – TA Triumph-Adler DCC 2526 User Manual
Page 268: Ready to copy.(full-color), Ready to copy.(full col.)
Section 8 OPTIONAL EQUIPMENT
8-14
4
Set the originals to be copied.
Verify the direction in which the originals were set.
5
Press the [Start] key.
Scanning of the originals will start and the number of
originals that was set will be displayed.
6
Copying will start and each finished copy will be
automatically hole punched and ejected onto the Finisher.
7
Once copying is completed, remove the finished copies from
the Finisher.
Selecting the copy eject location
1
Press the “Function” key, “Down” key, and then the “Select
of Output” key.
This will display the Select of Output screen
Inch specifications
Metric specifications
2
Select the copy eject location.
Inch specifications
Metric specifications
3
Press the “Close” key.
This will return to the screen in step 1.
4
Place the document on the copier.
5
Press the [Start] key.
This will start scanning of the document and display the
number of pages.
NOTE
If you are not using a document processor, repeat steps 4
and 5 for all of the document pages. After all of the pages
have been scanned, press the “End” key.
6
As copying is performed, the pages are ejected to the tray
you selected.
7
Remove the ejected copies after copying is complete.
Set
Ready to copy. (Full-Color)
Paper Size
Basic
User choice
Function
Color func.
Program
11x8
1
/
2
"
Auto
Rotation
Eco Print
Modify
Copy
Up
Down
OHP
backing
Orig. set
direction
Select of
Output
Proof Copy
Invert
Sharp
-ness
Memo
pages
Mirror
Gloss
Mode
Set
Ready to copy. (Full Col.)
Paper Size
Basic
User choice
Function
Colour func.
Program
Auto
Rotation
Eco Print
Modify
copy
Up
Down
OHP back
Orig. set
direction
Select of
Output
Test copy
Invert
Sharp
-ness
Memo
pages
Mirror
Gloss
Ready to copy.(Full-color)
set
Back
Close
Tray 1
Tray 2
Select proper output tray to avoid
mixing jobs.
You can confirm output tray with output
management.
Select of Output
Tray A
Top tray
Tray 5
Tray 4
Tray 3
Resistet
Ready to COPY.(Full Col.)
Resistet
set
Back
Close
Select proper output tray to avoid
job mixing.
You can confirm output tray with output
management.
Select of Output
Tray 1
Tray 2
Tray A
Top tray
Tray 5
Tray 4
Tray 3