TA Triumph-Adler DCC 2526 - Manual (Page 97)

Section 6 OTHER CONVENIENT FUNCTIONS
6-49
9
Once the test copy set is complete, a screen will be
displayed in order to verify whether or not you want to
make the initially designated number of copy sets at the
present settings, and the copier will enter a waiting-to-copy
state. Check the test copies.
Inch specifications
Metric specifications
• If there is no problem with the copies
Press the [Start] key and copying of the initially designated
number of copy sets will start. If you want to change the number
of copies to be made, press the “Change Preset” key and enter the
actual number of copies you do want to make.
• If there is some problem with the copies
Press the “Cancel” key to cancel the copy job and start the
procedure from the beginning.
Check proof copy.
To stop and retry, press "Cancel" key.
To continue to print, press "Start" key.
Orig. page
-------
1 sided
Rear 100%
APS 11x8 1 / 2 Plain
Change
Preset
Cancel 1 sided
Sort
Top tray
Count/Set Output
1 0/ 2
Check test copy.
To stop and retry, press "Cancel" key.
To continue to print, press "Start" key.
Original
-------
1-sided
Rear 100%
APS Plain
Change
Preset
Cancel 1-sided
Sort
Top tray
Count/Set
1 0/ 2
Output