TA Triumph-Adler DCC 2526 - Manual (Page 139)

Section 7 COPIER MANAGEMENT
7-3
Accessing the copy management menu
screen
Perform the following procedure in order to access the copy
management menu screen.
1
With the content of the “Basic” tab displayed, press the
[Default Setting/Counter] key.
The “Default setting” screen will be displayed.
2
Press the “Management” key on the right side of the touch
panel.
Inch specifications
Metric specifications
3
Use the numeric keys on the keypad to enter the 4-digit
management code.
The factory default management code is “2600”.
If the entered management code matches the currently
registered one, the copy management menu screen will be
displayed.
Inch specifications
Metric specifications
4
Press the key that corresponds to the desired procedure.
The setting screen for that procedure will be displayed.
Inch specifications
Metric specifications
NOTES
• It is possible for you to change the 4-digit management
code. (See “Changing the management code” on
page 7-60.)
• Perform the following procedure that corresponds to the
desired setting.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Close Enter the administrator number.
Close Enter the administrator number.
Close
Each Mgt.
Total
Management
total
Managem. Total
Default setting
Register/Sett.
Management
Def. Set.
Management
edit Off
On
Management
Management
Close
Each Mgt.
Total
Management
total
Managem. Total
Default setting
Register/Sett.
Management
Def. Set.
Management
edit Off
On
Management
Management