TA Triumph-Adler DCC 2526 - Manual (Page 233)

Section 7 COPIER MANAGEMENT
7-97
Customize screen layout (Main functions)
Perform the following procedure to change the order of the main
functions and modes that are displayed in the “Basic” and the
“User choice” tabs in order to make the display more appropriate to
the way you use the copier.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-69.)
Inch specifications
Metric specifications
2
Select “Customize(Main function)” under the “Default
menu” column on the left side of the touch panel and then
press the “Change #” key.
The “Customize(Main function)” screen will be displayed.
Inch specifications
Metric specifications
3
If you want to change the order of the basic functions and
modes, press the “ ” or the “ ” cursor key to select the
item you want to move. Then press the “Move Ahead” key
or the “Move Behind” [“Move backward”] key to move that
item and change the order of display. The final display of
the basic functions and modes will be in accordance with
the numbers in the list and those shown in the tabs to the
left of that list.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Copy default
Preset limit
Modify Copy
Display register key
Customize(Main function)
Customize(Add function)
999 Set
On / Default Off
On
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Copy default
Preset limit
Modify Copy
Display"Register"key
Customize(Main function)
Customize(Add function)
999 Set
On / Default Off
On
Close Back
Default setting - Copy default
Customize(Main function)
Move
Ahead
Move
Behind
Register mode
1 Exposure mode
2 Reduce/Enlarge
3 Orig. quality
4 Sort/Finished
5 1/2 sided
6 Original size
Basic
User choice
Close Back
Default setting - Copy default
Customize(Main function)
Move
ahead
Move
backward
Register mode
1 Exposure mode
2 Reduce/Enlarge
3 Quality orig.
4 Sort/Finished
5 1/2 sided
6 Original size
Basic
User choice