TA Triumph-Adler DCC 2526 - Manual (Page 203)

Section 7 COPIER MANAGEMENT
7-67
Manual exposure
adjustment
(text+photo mode) Adjusts the median exposure value when the text+photo
mode is selected for the image quality. -3 – +3 Standard setting
(0) 7-85
Manual exposure
adjustment (photo
mode) Adjusts the median exposure value when the photo mode is
selected for the image quality. -3 – +3 Standard setting
(0) 7-86
Manual exposure
adjustment (print
mode) Adjusts the median exposure value when the print mode is
selected for the image quality. -3 – +3 Standard setting
(0) 7-87
Manual exposure
adjustment (text
mode) Adjusts the median exposure value when the text mode is
selected for the image quality. -3 – +3 Standard setting
(0) 7-88
Manual exposure
adjustment (map
mode) Adjusts the median exposure value when the map mode is
selected for the image quality. -3 – +3 Standard setting
(0) 7-89
Sort mode ON/OFF Determines whether or not the Sort mode will be the default
setting in the initial mode. Sort:On / Sort:Off Sort:On 7-90
Auto Rotation mode
ON/OFF Determines whether or not the Auto Rotation mode will be
the default setting in the initial mode. If Auto Rotation is
turned ON, the image will be automatically rotated even if
the orientation of the original is different from that of the
paper loaded in the drawers[cassettes]. Rotate / No Rotate Rotate 7-91
Margin width Determines the default value of the location and width of the
margins in the margin mode. Inch
specifications
Left/right: 0 – 3/4
(inches)
Top/bottom: 0 – 3/4
(inches) Inch
specifications
Left: 1/4 (inches)
Top: 0 (inches) 7-92
Metric
specifications
Left/right: 0 – 18
(mm)
Top/bottom: 0 – 18
(mm) Metric
specifications
Left: 6 (mm)
Top: 0 (mm)
Erased border width Determines the default value for the width of the border to
be erased in the two border erase modes.
Inch
specifications
Outside border:
0 – 3/4 (inches)
Center area:
0 – 1
1/2 (inches)
Inch
specifications
Outside border:
1/4 (inches)
Center area:
1/2 (inches) 7-93
Metric
specifications
Outside border:
0 – 18 (mm)
Center area:
0 – 36 (mm) Metric
specifications
Outside border:
6 (mm)
Center area:
12 (mm)
Copy limit Sets the limit for the number of copies (or copy sets) that can
be made at a time. 1 – 999 999 7-94
Default setting Description
Available
settings
Factory
setting
Reference
page