TA Triumph-Adler DCC 2526 - Manual (Page 201)

Section 7 COPIER MANAGEMENT
7-65
Copy default settings
The following table indicates the copy default settings available in this copier.
Change any or all of the settings as desired in order to make the most effective use of your copier.
Default setting Description
Available
settings
Factory
setting
Reference
page
Exposure mode Selects between auto exposure and manual exposure as the
default copy exposure mode in the initial mode. Manual / Auto Manual 7-70
Exposure adjustment
step Changes the incremental step to be used during adjustment
of the copy exposure. 1 step / 0.5 step 1 step 7-71
Original quality Determines the default setting that will be used for the
image quality in the initial mode. Text+Photo/ Photo
original / Print
original / Text/ Map Text+Photo 7-72
Copy mode Sets the default mode for color copying. Auto color (Auto
colour) /
Full color (Full
colour) / Black
white Full color
(Full colour) 7-73
A.C.S. adjustment Adjusts the sensitivity level that the copier will use to
differentiate between color originals and black and white
originals when the A.C.S. (Auto Color Selection) mode is
selected. The lower the setting, the more originals will be
identified as color originals, and the higher the setting, the
more originals will be identified as black and white
originals. 1 – 5 3 7-74
Eco print mode
ON/OFF Determines whether the Eco print mode will be the default
setting in the initial mode. In this case, the amount of toner
that is used to make the copies will be reduced, and images
will be printed out relatively lighter than normal. Off / On Off 7-75
Paper selection Sets whether the copier will automatically select the same
size of copy paper as the original once an original is set
(APS: auto paper selection mode), or whether the
drawer[cassette] selected “Default drawer” [“Default
cassette”] setting will be automatically selected. APS / Default
drawer[cassette] APS 7-76
Paper type (Auto
color paper selection) Selects the types of paper that are available for selection
under the APS (Auto Paper Selection) mode when making
color copies.
* It is possible to select the type of paper that has been
designated for the drawer[cassette] currently in use.
Off / On On 7-77
Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Bond
High quality
Vellum
Custom 1 –
Custom 8 Plain