TA Triumph-Adler DCC 2526 - Manual (Page 159)

Section 7 COPIER MANAGEMENT
7-23
7
Select “Name to display” under the “Setting item” column
on the left side of the touch panel and then press the
“Change #” key.
The “Name to display” screen will be displayed.
Inch specifications
Metric specifications
8
Press the “AllDel.” key to delete the old department name,
then enter the new name.
Inch specifications
Metric specifications
NOTE
For information on how to enter the department name,
refer to “Entering characters” on page 7-115.
9
Press the “End” key.
The touch panel will return to the screen in step 7.
10
Press the “Close” key.
The touch panel will return to the screen in step 3.
11
Press the “Close” key.
The touch panel will return to the screen in step 2.
12
Press the “Close” key.
Value Setting item
Default setting - Management - Management edit
Change #
Department inform. edit
ID-code
Name to display
01
1st Sales Dept.
Close Back
Value Setting item
Default setting - Management - Management edit
Change #
Department info. Editing
ID-code
Name to display
01
1st Sales Dept.
Close Back