TA Triumph-Adler DCC 2526 - Manual (Page 135)

Section 6 OTHER CONVENIENT FUNCTIONS
6-87
This function automatically turns the power switch OFF ({) if no
operation has been performed on the copier for a certain period of
time (1 to 240 minutes). When you want to make copies again,
simply turn the power switch back ON ( | ).
The factory default setting is for the auto sleep function to engage
after 60 minutes.
More about the auto sleep function
The auto sleep function is a power-saving feature which
automatically turns the power switch to the copier OFF ({) when a
certain time elapses without any operation being performed.
Copiers are generally in a standby mode more than they are in
actual operation, so power consumption in the standby mode
occupies a large part of overall consumption. Having the copier
turned OFF ({) automatically after a certain amount of time
reduces unnecessary power consumption in the standby mode or at
night if the copier happens to be left on accidentally. The result is a
lower electricity bill.
NOTES
• In order to change the amount of time that will elapse
before the auto sleep function engages, see “Auto sleep
time” on page 7-52. In order to disable the auto sleep
function, see “Auto sleep ON/OFF” on page 7-61.
• If the optional Printer Kit or Fax Kit is installed in your
copier, the copier will enter a sleep mode when the auto
sleep function engages. In this state, when the copier
detects the presence of data to be printed out, it will
automatically revert to a copy-ready state and begin
printing out that data.
Auto sleep function