TA Triumph-Adler DCC 2526 - Manual (Page 242)

Section 7 COPIER MANAGEMENT
7-106
Perform the following procedure if it seems like the printed image
is blurred or running, or if there are unprinted white areas on the
page. The drum refreshing operation will take approximately
5 minutes.
1
With the content of the “Basic” tab displayed, press the
[Default Setting/Counter] key.
The “Default setting” screen will be displayed.
2
Press the “User adjustment” key.
Inch specifications
Metric specifications
3
Press the “Drum refresh” key. The “Drum refresh” screen
will be displayed.
Inch specifications
Metric specifications
4
Press the “On” key. The drum refreshing process will begin.
This operation will take approximately 5 minutes.
Inch specifications
Metric specifications
Drum refresh
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close User adjustment
Default setting
Auto gray
adjust
Drum
refresh
Default setting / Counter
Close User adjustment
Default setting
Auto Grey
Adjust
Drum
refresh
Close
Default setting - User adjustment
Refresh the drum when image blur or white dots appear
on the image.
Drum refresh
On
Close
Default setting - User adjustment
Refresh the drum when image blur or white dots appear
on the image.
Drum refresh
On