TA Triumph-Adler DCC 2526 - Manual (Page 231)

Section 7 COPIER MANAGEMENT
7-95
Repeat copying ON/OFF
Perform the following procedure to set whether or not to prohibit
repeat copying, as well as whether or not to make repeat copying
the default setting in the initial mode.
NOTE
This setting is displayed on duplex copiers or when the
optional Memory Copy Board is installed.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-69.)
Inch specifications
Metric specifications
2
Select “Modify Copy” under the “Default menu” column on
the left side of the touch panel and then press the “Change
#” key.
The “Modify Copy” screen will be displayed.
Inch specifications
Metric specifications
3
If you want to prohibit repeat copying, press the “Off” key.
If you want to make repeat copying the default setting in
the initial mode, press the “On” key.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Copy default
Preset limit
Modify Copy
Display register key
Customize(Main function)
Customize(Add function)
999 Set
On / Default Off
On
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Copy default
Preset limit
Modify Copy
Display"Register"key
Customize(Main function)
Customize(Add function)
999 Set
On / Default Off
On
Close Back
Default setting - Copy default
Select ON to activate Modify Copy or OFF
to inactivate it.
Modify Copy
Function Default
On
Off
On
Off
Close Back
Default setting - Copy default
Select ON to activate Modify Copy or OFF
to inactivate it.
Modify Copy
Function Default
On
Off
On
Off