TA Triumph-Adler DCC 2526 - Manual (Page 169)

Section 7 COPIER MANAGEMENT
7-33
Non-standard printer driver printout (Printer)
Perform the following procedure when “On” is selected as the
“Printer function management ON/OFF” setting and you want
to want to allow the use of printer drivers other than those
available under copy management.
NOTE
This setting will only be available when “On” is selected
as the “Printer function management ON/OFF”
setting.
1
Select “Others Mgt. Reg. (print)” under the “Setting item”
column on the left side of the touch panel and then press
the “Change #” key.
The “Others Mgt. Reg. (print)” screen will be displayed.
Inch specifications
Metric specifications
2
To allow the use of printer drivers other than those
available under copy management, press the “On” key.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 1.
3
Press the “Close” key.
The touch panel will return to the screen in step 1.
Close
Change #
Value Setting item
Default setting - Management
Copy management
Print. Managem.
Printer error report
Others Mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Management
Fax Management
Management Def. setting
On
On
On
On
All
On
On
Close
Change #
Value Setting item
Default setting - Management
Copy management
Print. managem.
Printer error report
Others mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Management
Fax Management
Management Def. setting
On
On
On
On
All
On
On
Off
On
Close Back
Default setting - Management - Management Def. setting
Others Mgt. Reg. (print)
Output of print. is possible for unspecif. ID-code.
Off
On
Close Back
Default setting - Management - Management Def. setting
Others mgt. Reg. (print)
Output of print. is possible for unspecif. ID-code.