Erased border width, Default setting / counter – TA Triumph-Adler DCC 2526 User Manual
Page 229
Section 7 COPIER MANAGEMENT
7-93
Perform the following procedure to determine the default value for
the width of the border to be erased in the two border erase modes.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-69.)
Inch specifications
Metric specifications
2
Select “Default erase width” under the “Default menu”
column on the left side of the touch panel and then press
the “Change #” key.
The “Default erase width” screen will be displayed.
Inch specifications
Metric specifications
3
Press the “+” key or the “-” key under the “Border” and
“Center” fields to change the displayed widths to those
desired.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
report
Default setting / Counter
Close
Up
Down
Change #
Setting mode
Default menu
Default setting
Copy default
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort:On
Rotate
Left
1
/
4
" 0"
Border
1
/
4
" Center
1
/
2
"
999 Set
Default setting / Counter
Close
Up
Down
Change #
Setting mode
Default menu
Default setting
Copy default
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort:On
Rotate
Left 6mm 0mm
Border 6mm Center 12mm
999 Set
Close
Back
Default setting - Copy default
Adjust default setting of erase width.
Default erase width
Border
Center
"
(0~
3
/
4
)
"
(0~1
1
/
2
)
Close
Back
Default setting - Copy default
Adjust default setting of erase width.
Default erase width
Border
Center
mm
12
mm
6
(0~18)
(0~36)