ProSoft Technology MVI69-PDPMV1 - Manual (Page 141)

MVI69-PDPMV1 ♦ CompactLogix or MicroLogix Platform Diagnostics and Troubleshooting
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 141 of 225
July 8, 2011
5.1.4 Viewing the Controller Tags in RSLogix 5000
Note: For this procedure, you must connect a serial cable from the serial port on your PC to the
DB9M connector on the CompactLogix or MicroLogix processor.
1 Open the sample ladder logic in RSLogix 5000.
2 Open the Communications menu, and choose G
O O NLINE .
3 In the Controller Organization window, double-click C ONTROLLER T AGS .
4 Expand the MVI69PDPMV1, MVI69PDPMV1.Status and
MVI69PDPMV1.Status.Fieldbus tags.
In the illustration above, the binary value in
MVI69PDPMV1.Status.Fieldbus.FB_Slave_Cfg_List[15] indicates that a slave
is configured at address 125 (the PROFIBUS Slave Address configured in the
Slave Configuration procedure).