ProSoft Technology MVI69-PDPMV1 - Manual (Page 67)

MVI69-PDPMV1 ♦ CompactLogix or MicroLogix Platform Module Setup
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 67 of 225
July 8, 2011
To view or print the Processor Network Memory Map
1 On the Master Setup dialog box, click the S HOW M EMORY M AP button, near
the bottom of the window. This action opens the inRAx Data Type dialog box.
2 Notice that there are buttons in the Display area of the dialog box to show
inputs and outputs. These input and output maps correspond to the input and
output data you configured for the PROFIBUS slaves. Notice also that there
are check boxes to display slot numbers and PROFIBUS addresses.
3 Click P RINT to print the input and output maps for reference. Note that you
must do this for both input and output maps.
4 When you have finished printing the processor memory maps, click OK to
close the dialog box. Click OK again to close the Master Setup dialog box.
5 Keep the printed memory maps on hand. You must refer to them when you
configure the sample ladder logic in RSLogix. The sample ladder logic
contains input and output arrays that must be cross-referenced with the
variables.
The next step is to download the project to the MVI69 module.