ProSoft Technology MVI69-PDPMV1 - Manual (Page 74)

Module Setup MVI69-PDPMV1 ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS DPV1 Master
Page 74 of 225 ProSoft Technology, Inc.
July 8, 2011
To use the CIPconnect Path Editor
1 Click CIP P ATH E DIT to open the CIPconnect Path Editor dialog box.
Parameter Description
Source Module Source module type
Source Module IP Address IP address of the source module
Source Module Node Address
ControlNet Node address of the source module
Note: Not currently used by MVI69 modules
Destination Module Select the destination module associated to the source module
in the rack. The connection between the source and destination
modules is performed through the backplane.
Destination Module Slot Number The slot number where the destination module is located
2 Click C ONSTRUCT CIP P ATH to build the path in text format
3 Click OK to confirm the configured path.
The following example should provide a better understanding on how to set up
the path for your network.