Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector - Manual (Page 127)

127
• Adjust the MPEG Noise Reduction setting to reduce the noise or artifacts seen in MPEG video.
• Adjust the Deinterlacing setting to convert interlaced-to-progressive signals for certain video
image types (only displayed when the current signal is interlaced [480i/576i/1080i]).
• Adjust the Super-resolution setting to reduce blurring when projecting low-resolution images.
• Adjust the Detail Enhancement setting to create a more emphatic texture and material feel of the
image.
The setting values in the preset option are overwritten as you make changes.
8. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Quality Settings - Image Menu
Adjusting the Projector's Brightness Level
You can adjust the brightness of your projector's light source.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.