Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual
Page 53
53
1.
Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection
(Windows) software.
Note:
See the online
Epson iProjection Operation Guide
for instructions.
2.
Turn on the projector.
3.
Press the
LAN
button on the remote control.
The LAN standby screen is displayed.
4.
Verify the SSID and IP address.
5.
Insert the USB key into the projector's
USB-A
port.
You see a projected message that the network information update is complete.
6.
Remove the USB key.
7.
Insert the USB key into a USB port on your computer.
8.
Follow the on-screen instructions to install the Epson iProjection software.
Note:
If you see a Windows Firewall message, click
Yes
to disable the firewall. You need
administrator authority to install the software. If it is not installed automatically, double-click
MPPLaunch.exe
in the USB key.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the
LAN
or
Source Search
button on your remote control or restart your computer.