Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual
Page 46
46
3.
Select the
Network
menu and press
Enter
.
4.
Select
Network Settings
and press
Enter
.
5.
Select
Projector Name
and enter a name up to 16 alphanumeric characters long to identify the
projector on a network.
6.
Set the
Priority Control Interface
setting to
Wired LAN
.
7.
Select the
Wired LAN
menu and press
Enter
.
8.
Select
IP Settings
and press
Enter
.
9.
Select your IP settings as necessary:
• If your network assigns addresses automatically, turn on the
DHCP
setting.
• If you must set addresses manually, turn off
DHCP
and enter the projector's
IP Address
,
Subnet
Mask
, and
Gateway Address
as needed.
Note:
To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press
Enter
. Alternatively, press and hold the
Num
button on the remote control while entering the desired numbers.