Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual
Page 55
Advertising
55
5.
Select the
Network
menu and press
Enter
.
6.
Select
Network Settings
and press
Enter
.
7.
Select
Projector Name
and enter a name up to 16 alphanumeric characters long to identify the
projector on the network.
8.
Set the
Priority Control Interface
setting to
Wireless LAN
.
9.
Select the connection method:
• To connect directly to a wireless device (Simple AP mode), set the
Simple AP
setting to
On
and
go to step 17.
• To connect to a device via a wireless network router (infrastructure mode), set the
Simple AP
setting to
Off
and go to the next step.
• If you installed the optional wireless LAN module and want to use both connection methods, set
the
Simple AP
setting to
On
and go to the next step.
Advertising
This manual is related to the following products: