Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector - Manual (Page 59)

59
Setting Options Description
SSID Up 32 alphanumeric characters Manually set the SSID (network
name) of the wireless LAN
system the projector is
connecting to
Security WPA2/WPA3-PSK
WPA2/WPA3-EAP
WPA3-PSK
WPA3-EAP
Open
Selects the type of security used
on the wireless network
WPA2/WPA3-PSK : uses
WPA2/WPA3 personal mode;
encryption is dependent on the
access point settings;
Passphrase must be the same
as the access point
WPA2/WPA3-EAP : uses
WPA2/WPA3 enterprise mode;
encryption is dependent on the
access point settings
WPA3-PSK : uses WPA3 security
with AES for encryption. Use the
Passphrase value to establish a
connection from a computer
WPA3-EAP : uses WPA3
enterprise mode; encryption is
dependent on the access point
settings
Passphrase Various passphrases from 8 to
63 characters Selects the pre-shared key used
on the network; passphrases are
case-sensitive. If the network
settings are reset after the
passphrase has been changed
more than once, the first
passphrase is restored. This
setting is only displayed when
Security is set to WPA3-PSK or
WPA2/WPA3-PSK .