Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual
Page 129
129
6.
If you turn on
Maintain Brightness
, select the
Maintain Brightness Level
setting and check the
Estimated Remains
information.
7.
If you turn off
Maintain Brightness
, select the
Light Source Mode
setting:
•
Normal
: Sets brightness to the maximum level (ideal for conference rooms, auditoriums, and
lecture halls)
•
Quiet
: Sets brightness to 70% and reduces fan noise (ideal for libraries, theaters, museums, and
art galleries)
•
Extended
: Sets brightness to 70% and extends the life expectancy of the light source (ideal for
darker environments with ambient light, such as museums and art galleries, where a reduced
maintenance cycle is desired)
•
Custom
: Allows you to select a custom brightness level between 70 to 100%
8.
If you set the
Light Source Mode
setting to
Custom
, select
Brightness Level
and use the left and
right arrow buttons to select the brightness.
9.
Press
Menu
or
Esc
to exit the menus.
Note:
For the best results in maintaining the brightness level, set the
Light Source Calibration
setting to
Run Periodically
in the projector's Management menu.
Constant Brightness Usage Hours
Parent topic:
Using Basic Projector Features
Related references
Administration Settings - Management Menu
Related tasks