Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector - Manual (Page 205)

205
Setting Options Description
HDMI Link Device Connections
HDMI Link
Audio Out Device
Power On Link
Power Off Link
Adjusts the HDMI Link options that allow
the projector or remote to control HDMI-
connected devices that support the CEC
standard
Device Connections : lists the devices
connected to the HDMI1 and HDMI2 ports
when HDMI Link is enabled
HDMI Link : enables or disables the HDMI
Link feature
Audio Out Device : selects whether to
output audio from the internal speakers or a
connected audio/visual system
Power On Link : controls what happens
when you turn on the projector or a linked
device
• Bidirectional : automatically turns on the
connected device when you turn on the
projector, and vice versa
• Device -> PJ : automatically turns on the
projector when you turn on the
connected device
• PJ -> Device : automatically turns on the
connected device when you turn on the
projector
Power Off Link : controls whether linked
devices are turned off when the projector is
turned off
HDMI EQ Setting 1, 2, or 3 Adjusts the HDMI input signal level
depending on the devices connected to the
HDMI port. Change the setting if there is a
lot of interference in the image or if no
image is projected.
Reset Signal I/O Settings Resets all settings on the Signal I/O menu
to their default values