Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector - Manual (Page 94)

94
4 Lets you select the following common projector settings (these settings may vary depending
on other selected settings):
• Color Mode
• Brightness Level
• Volume
• Geometry Correction ( H/V-Keystone and Quick Corner are available)
• Aspect
Note: The Geometry Correction setting is only displayed when Fixed Installation is set to
Off and Geometry Correction is set to H/V-Keystone or Quick Corner in the projector's
Installation menu.
5 Moves to the previous or next page if there are more available input sources
6 Displays the projector name and the projector keyword
7 Displays the current time
Note: The Home screen closes after 10 minutes of inactivity.
Parent topic: Turning On the Projector
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
1. Press the power button on the projector or the remote control.