Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector - Manual (Page 214)

214
Setting Options Description
Auto Power On HDMI1
Computer1
USB Display
Off
Selects whether to automatically
turn on the projector when you
connect an input signal to a
specific input source
Sleep Mode On
Off
Automatically turns off the
projector after an interval of
inactivity
Sleep Mode Timer 1 to 30 minutes Sets the time before the projector
automatically turns off (
Sleep
Mode must be turned on)
A/V Mute Timer On
Off
Automatically turns off the
projector after 30 minutes of
inactivity
Standby Mode Communication On
Communication Off
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode
(setting is displayed only when
A/V Output is set to While
Projecting )
Port Wired LAN
Wireless LAN
Selects the port to use while the
Standby Mode setting is set to
Communication On
Startup Source Various input sources available Selects the source displayed on
startup in Content Playback
mode