Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector User Manual
Page 60
60
Setting
Options
Description
EAP Type
User name
Password
Client Certificate
Verify Server Certificate
CA certificate
RADIUS Server Name
Sets the EAP settings for WPA3-
EAP and WPA2/WPA3-EAP
security
IP Settings
DHCP
(
On
or
Off
)
IP Address
Subnet Mask
Gateway Address
Selects DHCP if your network
assigns IP addresses
automatically, or turns off DHCP
so you can enter the network's IP
address, subnet mask, and
gateway address as needed
DNS Server 1
/
DNS Server 2
Various IP addresses
Sets the IP address for the DNS
server using 0 to 255 for each
address field. The DNS server
resolves the host name
IPv6
On
Off
Enables IPv6 to allow monitoring
and control of the projector over
a network using Epson Web
Control and PJLink. When
enabled, the following settings
are available:
Auto Configuration
: selects
whether to automatically assign
addresses according to the
Router Advertisement
Use Temporary Address
:
enables use of a temporary IPv6
address
IP Address Display
On
Off
Selects whether to display the IP
address on the network standby
screen and Home screen
Parent topic: