Epson PowerLite L200SX 3600-Lumen XGA Short-Throw Laser 3LCD Smart Projector - Manual (Page 203)

203
Setting Options Description
Source Signal Format
Mic Input Level
Overscan
EDID
Reset to Defaults
Displays settings selected for the current
input source
Signal Format : sets the signal type and
video range for certain input sources
• Video Signal : specifies the signal type
from input sources connected to video
ports; if interference appears or no image
appears when set to
Auto , select the
appropriate signal type
• Video Range : sets the video range to
match the setting of an input source
connected to the HDMI ports
Mic Input Level : adjusts the volume from a
microphone when audio is not output to an
audio/visual system; when the
Mic Input
Level setting is turned up, the volume of
the other connected device is turned down,
and when the
Mic Input Level is turned
down, the volume of the other connected
device is turned up
Overscan : changes the projected image
ratio to make the edges visible by a
selectable percentage or automatically
when projecting a component signal
EDID : describes the display capabilities of
your projector when the selected input
source is
HDMI ; change this setting as
necessary according to the resolution of the
current input source
Reset to Defaults : resets all settings for
the current input source
A/V Output While Projecting
Always On
Determines when the projector outputs
audio and images to external devices; set
to
Always On to output audio and images
when the projector is in standby mode