Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) - Manual (Page 100)

100
3. Select the Extended menu and press Enter .
4. Select the Projection setting and press Enter .
5. Select a projection mode and press Enter .
6. Press Menu or Esc to exit the menus.
Parent topic: Projection Modes
Related references
Projector Setup Settings - Extended Menu
Turning On Dynamic Contrast
You can turn on the Dynamic Contrast setting to automatically optimize the image luminance. This
improves the image contrast based on the brightness of the content you project.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.