Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) User Manual
Page 124
Advertising
124
1.
Hold down the
Effect
button on the remote control for about five seconds or until you see this menu.
2.
Press the down arrow to select
Password
and press
Enter
.
You see the prompt "Change the password?".
3.
Select
Yes
and press
Enter
.
4.
Press the number buttons to set a four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5.
Enter the password again.
You see the message "Password accepted."
6.
Press
Esc
to return to the menu.
7.
Make a note of the password and keep it in a safe place in case you forget it.
Parent topic:
Advertising