Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) User Manual
Page 181
181
• Check the Event ID number displayed in the Info menu and check the link below to identify the
problem.
• If the access point security is WPA3-EAP, change the access point setting to
WPA2/WPA3-EAP
.
Parent topic:
Related references
Projector Network Settings - Network Menu
Event ID Code List
Solutions When You Cannot Access the Projector Through the Web
If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.
• For the user ID, enter
EPSONWEB
. (You cannot change the user ID.)
• For the password, enter the password set in the projector's Network menu. The default password is
admin
.
• Make sure you have access to the network the projector is on.
• Make sure you enter the projector's IP address in the web browser address bar and your device is on
the same network.
• If your Web browser is set up to connect via a proxy server, the
Epson Web Control
screen cannot
be displayed. Make settings for a connection without using a proxy server.
• If you set
Standby Mode
to
Communication On
in the projector's Extended menu, make sure the
network device is turned on. After turning on the network device, turn on the projector.
• Connect to a wired LAN, or to a wireless LAN with the
Connection Mode
setting set to
Advanced
.
Note:
The user ID and password are case sensitive.
Parent topic:
Related references
Projector Network Settings - Network Menu
Solutions When You Cannot Access the SD Card Through the Web
If you are unable to access the SD card through a web browser, try the following solutions:
• Make sure your device is on the same network as the projector.