Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) - Manual (Page 159)

159
Setting Options Description
Light Source
Calibration Run Now
Run Periodically
Schedule Settings
Last Run
Schedules Light Source Calibration to correct the
white balance of the light source
Run Now : starts Light Source Calibration
immediately
Note: You cannot use the Run Now function within
20 minutes of turning on the projector or when the
environmental temperature is high and light source
brightness is automatically reduced
Run Periodically : starts Light Source Calibration
after every 100 hours of use
Schedule Settings : displays the schedule settings
screen so you can schedule Light Source
Calibration to run periodically
Note: Light Source Calibration runs automatically
after every 100 hours of use only if the projector is
turned off. If the projector is on continuously for
more than 24 hours, or when direct shutdown is
used regularly, select
Run Now or set a schedule to
adjust this setting
Last Run : displays the date and time of the last
light source calibration
Reset All Config — Resets most of the projector settings to their default
values
You cannot reset the following settings using the Reset All Config option:
• User's Logo
• Startup Screen
Note: Only when you set the User's Logo Protection setting to On in the Password Protection setting
menu.
• Color Uniformity