Adjusting color uniformity – Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) User Manual
Page 110
110
8.
Press
Esc
to return to the previous screen.
Note:
For the best results in maintaining a constant brightness, set the
Light Source Calibration
setting to
Run Periodically
in the projector's
Reset
menu.
Parent topic:
Related references
General Projector Specifications
Projector Feature Settings - Settings Menu
Adjusting Color Uniformity
If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each
projector. (The color tone may not be uniform even after performing color uniformity.)
Note:
If you cannot adjust color uniformity, make sure the
Color Mode
setting is not set to
Dynamic
.
1.
Press the
Menu
button on the remote or control panel, select the menu, and press
Enter
.
2.
Select the
Multi-Projection
setting and press
Enter
.
3.
Select the
Color Uniformity
setting and press
Enter
.
4.
Select
On
as the
Color Uniformity
setting and press
Enter
, then press
Esc
.