Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) - Manual (Page 68)

68
Channel/Function Operation Parameters Description
10 Content playback Playlist 41
Playlist 42
Playlist 43
Playlist 44
Playlist 45
Playlist 46
Playlist 47
Playlist 48
Playlist 49
Playlist 50
Non-operational
164 to 167
168 to 171
172 to 175
176 to 179
180 to 183
184 to 187
188 to 191
192 to 195
196 to 199
200 to 203
204 to 255
11 Power control Power off
Non-operational
Power on
0 to 63 (default is 128)
64 to 191
192 to 255
Turns the projector
power on or off
13 Lock Cannot control
Can control
0 to 127 (default is 0)
128 to 255
Enables/disables Art-
Net operations
Note: If you are controlling the projector using Art-Net and operating it from the remote control, settings
made by the DMX controller or application software may differ from the projector's actual status. If you
want to apply all the channel controls to the projector, set Channel 13 to
Cannot control , then set it back
to Can control .
Parent topic: Using the Projector on a Network
Setting Up Web API
You can setup Web API from a Web browser and operate the projector using Web API.
Note: You can authenticate Web API communications using API authentication (Digest authentication).
The user name for API authentication is EPSONWEB ; use the password that is set for Web Control
Password .