Art-net channel definitions – Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) User Manual
Page 64
64
4.
Select the
Others
menu and press
Enter
.
5.
Set the
Crestron Connected
setting to
On
to allow the projector to be detected.
Note:
Enabling Crestron Connected disables the Message Broadcasting feature in the Epson
Projector Management software.
6.
When you are finished selecting settings, select
Complete
and follow the on-screen instructions to
save your settings and exit the menus.
7.
Turn off the projector, then turn it on again to enable the setting.
8.
Start your Web browser on a computer or device connected to the network.
9.
Go to the
Epson Web Control
screen by entering the projector's IP address into the browser's
address box.
10. Select the
Crestron Connected
settings. See the Crestron Web site for details.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Art-Net Channel Definitions
Art-Net is an Ethernet communication protocol based on the TCP/IP protocol. You can control the
projector by using a DMX controller or an application system.