Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) - Manual (Page 31)

31
Attaching and Removing the Cable Clips
You can install the cable clips that came with your projector to provide additional support to the power
cord and HDMI cable.
1. Connect the power cord and HDMI cable to the projector.
2. Insert the end of each cable clip anchor into the cable clip slot above the power inlet and HDMI port
as shown.
1 Cable clip slot
2 Cable clip anchor
3 Power cable clip
4 HDMI cable clip