Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) User Manual
Page 157
157
Event ID code
Cause and solution
0892
The WPA/WPA2/WPA3 authentication type does not match. Make sure the wireless
network security settings are correct.
0893
The TKIP/AES encryption type does not match. Make sure the wireless network
security settings are correct.
0894
Communication with unauthorized access point was disconnected. Contact your
network administrator.
0895
Communication with a connected device was disconnected. Check your device
connection status.
0898
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the
DHCP
setting in the Network menus.
0899
A communication error has occurred. Try restarting the network software and
restarting your projector. If that does not solve the problem, contact Epson for help.
089A
The EAP authentication type does not match the network. Check the wireless LAN
security settings and make sure that the security certificate is installed correctly.
089B
EAP server authentication failed. Check the wireless LAN security settings and
make sure that the security certificate is installed correctly.
089C
EAP client authentication failed. Check the wireless LAN security settings and make
sure that the security certificate is installed correctly.
089D
Key exchange failed. Check the wireless LAN security settings and make sure that
the security certificate is installed correctly.
0920
The internal battery that saves the projector's date and time settings is running low.
Contact Epson for help.
Parent topic: