Solutions when a playlist does not play, Solutions when the image contains noise or static – Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) User Manual
Page 174
174
Related tasks
Changing the Image Aspect Ratio
Zooming Into and Out of Images
Solutions When a Playlist Does Not Play
If a playlist on the SD card does not play, try the following solutions:
• Make sure you saved the playlist to the SD card.
• Make sure the SD card is inserted correctly into the projector.
• Make sure the SD card is not write-protected.
• Make sure the file type on the SD card is supported.
• Make sure you use SDHC cards of Class 10 or higher with a maximum of 32 GB or SD cards in FAT16
or FAT32 format.
Note:
See the
Epson Projector Content Manager Operation Guide
for details.
Parent topic:
Solving Image or Sound Problems
Related tasks
Solutions When the Image Contains Noise or Static
If the projected image seems to contain electronic interference (noise) or static, try the following
solutions:
• Check the cables connecting your computer or video source to the projector. They should be:
• Separated from the power cord to prevent interference
• Securely connected at both ends
• Not connected to an extension cable
• Make sure the SD card is inserted correctly.
• Check the settings on the projector's Signal menu to make sure they match the video source.
• Select a computer video resolution and refresh rate that are compatible with the projector.
• If you adjusted the image shape using the projector controls, try decreasing the
Sharpness
setting to
improve image quality.