Math expressions and totalization – Omega RD200 User Manual

Page 105

Advertising
background image

-101-

16. Math Expressions and Totalization



This section outlines math expressions and totalization. For programming, read the separate instruction
manual for “Math Expressions and Totalizations (Option)”.

1

Math Expressions

(1) Measured values are computed and the results are displayed and stored into memory.
(2) Math expressions comprise basic calculations, totalization, flow rates, etc., which are depending on the

relevant model code.

(3) 18 types of math expressions are provided and they can be programmed to any channel.

Display

characters

Names

Remarks

(1) None

No computation (Display and printing of measured
values)

(2)



Arithmetical operation 1

+, -. x (Aax + By + Cxy + D)

(3)



Arithmetical operation 2

÷ (Ax/y + B)

(4)



Natural Logarithm

LoG

e

X

(5)



Logarithm LoG

10

X

(6)



Exponential e

X

(7)



Square root

Rx – Rz/Rs - Rz

Rs: Max. range, Rz: Min. range

(8)



Temperature/

humidity

Computation of measured values by the dry and wet
bulbs by using the relative humidity tables

(9)



Maximum

Maximum value at the programmed “interval period”

(10)



Minimum

Minimum value at the programmed “interval period”

(11)



Average value

Average value at the programmed “interval period”

(12)



Totalizing

| X |

B

a

si

c c

a

lc

ulation

(13)



Data communications

input

Displayed only for the communications Interface
(option)

(14)



Totalization

Displayed only for the totalization (option)

(15)



Flow correction

computation 1

To

tali

za

tion,

flow

rate

, et

c.

(21)



Flow correction

computation 7

2

Totalizing

(1) Measured values and computed results are totalized and the results are displayed and printed. The reset of

the totalization is executed with the programmed interval or a contact signal for the “remote contacts”
(option).

(2) Totalization is displayed as “int”. This can be programmed to any channel.

3

Instruction manual

An instruction manual (INST. No. INE-288) for “Math expression and totalization (option)” is attached
separately.

Math expressions and totalization

Remarks

Advertising
This manual is related to the following products: