Omega RD200 - Manual (Page 57)

－５３－
10. OPERATIONS 10.1 Fixed-Time Printing and Intervals
After your recorder is turned on, parameters including time, chart speed and scale are printed at specified intervals.
The place of printing is in principle on the left side of the chart paper.
Printing items Printing intervals, etc.
1. Year/Month/Day, Time
When power or printing is switched on
<Ex.> 2000.10.03.14:25＊ (＊: Only when time axis synchronization is on)
2. Year/Month/Day 24-hour period (Printing every 00 hour 00 minute) <Ex.> 2000.10.04
3. Chart speed Approx. 84 mm intervals <Ex.> 20 mm/h
Approx. 42 mm intervals, in order of channel No.
When the printing format (option) is added, the printing contents vary depending on
the selected format as shown in the following examples.
When the printing format is not added (standard), the printing is as shown in (1).
(1) Standard (Sd) (2) Automatic range shift (Ar)
1:TIC1
0.0/500.0℃
Channel
Tag
Engineering unit
Scale
1: TIC1
0.0/500.0℃
（(Note) In 5 ranges (R1 to R5), the
range when the printing is being
executed is printed as the scale.
(3) Compressed/expanded (SP) (4) Zone record (PL)
+ + … ∗
1:TIC1
0.0/200.0/400.0/500.0℃
* The “+” mark is printed at the
positions of break points 1 and 2.
+ + …. ∗
1:TIC1
0.0/500.0℃
*: The “+” marking identifying zones is
printed at its boundary.
4. Scale
5. Engineering unit
6. Tag (Note)
(Note) For only channels
being
programmed
Printing of “time line” and “time” is interlocked with chart speed and is executed at the
following intervals. The start point of intervals is 00:00 hours.
Chart speed (mm/h) Time line Time
1 to 9 6 hours 12:00 only
10 to 15 2 hours 4 hours
16 to 30 1 hour 2 hours
31 to 60 1 hour 1 hour
61 to 119 30 minutes 1 hour
120 to 149 30 minutes 30 minutes
150 or faster 30 minutes No printing
<Example> ＿ 10 : 30 ＊
c
Time line
d
Time
e
POC mark (Note: Printed only when the time
axis synchronization is on)
7. Time line
8. Time
(Note) See Section 9.6 for details.
No printing is executed except time line, data and programming change mark.
Zero 1st break
point
2nd break
point
Span
c d e
When the chart speed is 150 mm/h or faster Reference