Omega RD200 - Manual (Page 30)

－２６－
5. INSTALLATION 5.3 Recording Pen Loading
3 Plotter Pen Loading
(1) Before loading, remove the pen cap from
the plotter pen and write letters on a paper,
etc. for testing.
(2) Insert the plotter pen into its penholder
completely.
(Note) Incomplete insertion may result in
recording troubles.
(3) For unloading of the plotter pen, pull it from
the penholder.
4 Cartridge Pen Loading
(1) Before loading, remove the pen cap from the cartridge pen and write letters on a paper, etc. for testing.
(2) Push the cartridge pen into the penholder for the same pen No. as the pen.
• RD200 • RD2800
(3) For unloading of the cartridge pen,
● RD200: Pull out the left side of the pen from the holder, and then take off it by disengage its convex
part at the right side of the holder.
● RD2800: Pull the pen from the holder.
Plotter pen loading
Cartridge Pen Loading
Plotter pen
Penholder
Main shaft
Insert first,
then push in .
Push in.
1
2
1
2