Omega RD200 - Manual (Page 90)

－８６－
12. ALARM OUTPUT 12.4 Programming Output Mode
4
Programming Mode
     
5
Programming Flow Chart
<Example> Programming the relay coil phase to Energize, relay output/display to Hold and alarm display to
Hold:
Operation screen
[Check]
    
[To be ready for programming]
    
[Selecting relay coil]
    
[Selecting relay output]
    
Stored
The parameters are displayed in order
of (1) relay coil phase, (2) relay output
and (3) alarm display.
Relay coil phase : Energize : Not energize
Relay output/
display
: Hold : Not hold
Store the parameters into memory.
(Programming change mark is
printed.)

Relay
coil
Relay output
and display
Cursor
(1) (2)
Relay coil
Relay output and display
（ ＋ ）
3 sec. or more
DISP
DISP °C
SET
END
→
% /
°F
% /
ENTRY
Ref. 1
Ref. 2
Checking Reference 1
Stored Reference 2