Omega RD200 - Manual (Page 80)

－７６－
11. OTHER PROGRAMMING 11.12 Passcode/Key Lock
The procedure for [Key lock] programming differs depending on whether a passcode is programmed or not.
Press and simultaneously in the operation screen for 3 seconds or more to display the [Passcode
programmed/not programmed] check screen. If a passcode has been already programmed, it is not allowed to
go to the [Key lock] programming screen unless entering the correct passcode.
1
Passcode
• [Key lock] programming cannot be
allowed unless entering the correct
passcode.
• As the default is no passcode
programmed, you can program
[Key lock].
Program a passcode with a 4-digit
numeric value.
Programming range: 0001 to 9999
If “0000” is programmed, a
programming error occurs.
Keep the passcode programmed
in mind or somewhere safe. If you
lose the passcode, no [Key lock]
operation will be available.
2
Key Lock
When [Key lock] is programmed to
“LOCKED”, no key operation for the
following functions is accepted.
(1) Reprogramming of various
parameters
(2) Operations (printing ON/OFF,
chart paper feeding, digital data
printing, printing format selection,
and time axis synchronization
selection)
The following operations are
exceptional.
(1) Checking various parameters
(2) Programming the key lock to be
ineffective (UNLOCKED)
(3) Selection of operation screens
The status KEY LOCK (blue)
lights when the key lock is effective.
3
Programming Flow Chart
The flow differs depending on whether a passocde is
programmed or not. See next page for details.
Operation screen
Passcode
programmed?
PASS CODE non PASS CODE
Programming
passcode?
Enter passcode
PASS CODE PASS CHANGE LOCK
Program passcode Change passcode?
KEYLOCK UNLOCKED Select [CHANGE]
KEYLOCK LOCKED Select [LOCK]
(Note) In case an error message appears,
press any key other than
and reprogram.
Cursor
Cursor
Cursor
Ａ
YES
YES
NO
NO
NO
YES
Cursor
[UNLOCK]
selected
(Ineffective)
(Effective)
（ ＋ ）
3 sec. or more
[LOCK] selected
(Note)
to
Passcode programming range
In key lock Reference
SHIFT
/
SHIFT
/
SET
END
0
CLEAR
9
LIST
ENTRY
ENTRY
/ %
ENTRY
DISP
to
0
CLEAR
9
LIST
ENTRY
SHIFT
Ａ
Ａ
Keep your passcode in mind
Remarks