Printing, 3 list printing – Omega RD200 User Manual
Page 53
－４９－
9. PRINTING
9.3 List Printing
2
List 2 Printing
Operation screen
List 2 printing starts.
Interrupt?
List 2 printing ends.
(Approx. 30 min. for printing)
* With this procedure, the printing operation turns
off. Press and then press again
to turn it on.
(1) RECORD ON status lamp is not lit.
(2) KEY LOCK status lamp lights.
Chart speed does not affect this operation.
Chart paper forwards at a fixed speed.
Trace printing with a cartridge pen is not
interrupted. Other functions are continued
without being interrupted.
(1) Press and simultaneously, and
then press .
(2) The selection screen from [List 1] to [List 3]
appears. Move the cursor to “2”.
(3)
When is pressed,
appears for about 5 sec. For execution, go to
procedure
(4).
For no execution, press .
(4) Press to start “List 2” printing. The
cartridge pen moves to the end of the left side and
the chart paper forwards slightly.
(5) For interrupting the printing, press and
simultaneously. Your recorder returns to the normal
operation but the printing operation is turned off.
For turning on the printing operation, press
and then press again.
(6) When the list printing completes, your recorder
returns to the normal operation.
(1) Year/month/day, Time
(2) Chart speed (Note)
(3) Alarm outputs
(4) Time axis sync
(5) Message
(6) Operation record
(7) Remote contacts
(8) Mathematics
(Note) For the remote contacts (option), which can
program 3 speeds (No.1 to No.3), is added,
all programmed 3 speeds are printed.
(Note) The above example is for RD200. It is the same for
RD2800.
3
List 3 Printing
Move the cursor to “3” at the [List No. selection] and execute the same procedure as item
2
. All of the
programmed parameters are printed.
YES*
NO
List 2 printing details
[List No. selection]
Cursor
(1)
(2)
(5)
List 2 printing cannot be executed
in the following conditions.
Remarks
Operation during printing
Reference
Example of the List 2 printing
DISP
＋
or
SHIFT
9
LIST
℃
(3)
(4)
→
ENTRY
ENTRY
→
REC
ON/OFF
ENTRY
REC
ON/OFF
ENTRY
SHIFT
9
LIST
ENTRY
(6)
ENTRY
DISP
ENTRY
REC
ON/OFF
ENTRY
REC
ON/OFF
ENTRY