Omega RD200 - Manual (Page 122)

－１１８－
20. MEMORY CLEAR
This is for initializing parameters and correction data to the default values.
1
Initialization items
Items Clear function details and cautions
Parameters
Initializes all parameters excluding [time] to the default values.
Refer to Section 7.3 (List of programming items) for the default values.
Correction data Initializes all correction data to the default values.
Clock
The time is preprogrammed to Japanese time at shipment. When initializing the time, it
becomes 00:00 hours on January 1, 2000. If the operation screen is not shown due to a
failure of the LSI for time, clear the programmed time.
2
Operation Flow Chart
<Example> Initializing parameters
Operation screen
[Engineering mode selection]
（ ＋ ）
3 sec. or more
    
[Selecting initialization]
→
    
[Displaying items]
    
[Selecting item]
    
[Executing initialization]
  
: Memory clear
: Adjustment
: Hardware check
(1) : Parameters
(2) : Correction data
(3) : Clock
Press to initialize the selected
item. After initialization, the screen
returns to the [Displaying items]
screen.
2 sec.
or more
Memory
clearance
Cursor
(1) (2) (3)
Cursor
Cursor
Cursor
DISP
SHIFT
6
A～Z
°C °F ENTRY
ENTRY
°C °F
ENTRY
ENTRY
Engineering mode types Reference 1
Initialization items Reference 2
Initialization Reference 3
Ref. 1
Ref. 2
Ref. 3