Omega RD200 - Manual (Page 16)

－１２－
3. CONFIGULATION 3.2 Display
RD200
RD2800
(1) Characters
● Operation mode: Displays measured value, time, chart speed, and alarm status of each channel (CH).
See Section 6.4 for details.
● Programming mode: Displays programming items and programming parameters in an interactive method.
(2) Underline
Shows the trace printing color of each channel (CH).
(CH 1: Red, CH 2: Green, CH3: Blue, CH 4: Brown)
These underlines also function as a cursor appearing at the digit for programming parameter in the programming
mode.
(3) Status
Display Lighting condition Section
ALARM When an alarm activates. 10.3
CHART END When the end of chart is detected. 6.2
FAIL When the hardware related to servo-circuit/mechanism is abnormal.
POC When the time axis synchronization is enabled. 9.6
RECORD ON When the printing is on (enable). 6.2
KEY LOCK When the keys are locked. 11.12
(4) Bargraph
The bargraphs indicate the measured value of each channel in an analog form. These indications are
interlocking to the positions of the pens for trace printing.
Resolution RD200: 1/50 (2%), 51 segments
RD2800: 1/100 (1%), 101 segments
CH 1
CH 2
CH 3
CH 4
CH 1 CH 2 CH 4 CH 3
CH 1
CH 2
CH 3
CH 4
CH 1 CH 2 CH 3 CH 4 CLOCK CHART SPPED
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)