Unisys E-@CTION EFP9800 - Manual (Page 102)

EFP9800 ESC/POS Commands
6– 12 3255 4073– 002
Set Line Spacing
Sets the line spacing to n x (fundamental calculation pitch). The default value is
n
= 24. The command is only available for the paper selected using the Select
Paper for Setting Line Spacing command (1B 63 31). See the Set Fundamental
Calculation Pitch command (1D 50).
Hexadecimal Decimal ASCII Value of n
1B 33 n 27 51 n ESC 3 n 0-255
Standard Mode
The vertical direction of the fundamental calculation pitch is used to set the line
spacing.
Page Mode
Two types of fundamental calculation pitch are used to set the line spacing,
depending on the value of the Select Print Direction in Page Mode command
(1B 54 n). For more information see “ Page Mode” later in this section.
•
If 1B 54 n = 0 or 2, the vertical direction of the fundamental calculation
pitch is used.
•
If 1B 54 n = 1 or 3, the horizontal direction of the fundamental calculation
pitch is used.
Return Home
Returns the printhead to the standby position.
Hexadecimal Decimal ASCII
1B 3C 27 60 ESC <