Unisys E-@CTION EFP9800 - Manual (Page 217)

EF4270 Emulation Commands
3255 4073–002 9–13
Cancel Slip Waiting
Cancels slip waiting. The communication buffer is cleared and the printer
returns to roll mode. The command is executed immediately after it is received.
Hexadecimal Decimal ASCII
1B 7E 27 126 ESC ~
Print Characteristics Commands
These commands affect the appearance of printed information. They control the
following:
•
Character set selection
•
Character formatting
•
Print orientation
The commands are listed numerically by hexadecimal code.
Double-Wide Font
Starts double-wide printing. The pitch of the double-wide font is half of the
currently selected font. If the currently selected font is 40 characters per line
(13.9 pitch), the double-wide characters will print at 20 characters per line (6.9)
lines per inch.
This command may be used with the Double-High command 1B 48.
Hexadecimal Decimal ASCII
0E 14 SO
Double-Wide Off
Turns off double-wide printing.
Hexadecimal Decimal ASCII
0F 15 SI