Ordering paper and supplies, Receipt/journal paper, Slips and forms – Unisys E-@CTION EFP9800 User Manual
Page 21: Ordering paper and supplies –5, Receipt/journal paper –5, Slips and forms –5
About the EFP9800 Printer
3255 4073–002
1–5
Ordering Paper and Supplies
The following section lists the paper , supplies, and documentation available for
order.
Receipt/Journal Paper
Item Type
Number
One-Ply
Receipt or journal
150 feet
40-1004-874
Two-Plies Receipt/journal
95 feet
40-1005-871
Slips and Forms
The EFP9800 printer prints on single- or multiple-part slips in the slip station.
Slips must meet the following requirements (the receipt is included as one or
two of the parts depending if it is one-ply or two-ply):
Minimum Slip Size
2.75 inches (69.8 mm) wide by 5.0 inches (127 mm) long
Or
5.0 inches (127 mm) wide by 2.75 inches (69.8 mm) long
Maximum Slip Size
8.5 inches (215.9 mm) wide by 11.69 inches (297 mm) long
Total thickness
Single-part slips: 0.003 inches (0.076 mm) (minimum)
Multiple parts: 0.014 inches (0.355 mm) (maximum—includes the
receipt)
Number of parts
Up to a maximum of five parts (the receipt is included as one or two
parts)
Note: If card stock is present, it should be the bottom part. If
multiple-part slips are used, the double-strike mode must be
used to ensure that all parts are printed on clearly. Contact
your sales representative to order slips and forms.